JC-B450-4
JC-B450-4 Flexo Printing Machine
- Super short distance from feeding to receiving.
- Ceramic stick with scraper, printing smooth, clear color.
- The length of repeated printing is 241.3-635MM to fill the gap of insufficient printing length of laminated flexographic press.
- The gear color register is adopted to solve the defects of 360-degree color register, such as large gap and poor assembly, which affect the accuracy of color register and the stability of printing.
- From the coil material for paper, printing, IR, winding coherent completion.
|
Technical Specifications |
|
|
Model |
JC-B450-4 |
|
Printing Color |
4 colors |
|
Maximum width of substrate |
450mm |
|
Printing width |
100-450mm |
|
Printing speed |
10-120m/min |
|
Printing circumference |
241.3-635mm |
|
Printing speed varies due to printing material, layout, printing ink, printing process and operator level |
|
|
Drying method |
Infrared heating 3kw (4 groups) |
|
Total power of the whole machine |
24KW |
|
Power supply |
3-phase *380V*50HZ, three-phase west line system |
|
Dimensions |
65000(L) x 1400 (W) x 1000 (H) mm |
|
Power air switch |
50A/3P |
|
Insert wire |
4.0mm2*4 copper wire |
|
Unwinding |
|
|
Unwinding device |
Single arm center rolls up |
|
Maximum diameter of unwinding |
Φ1200mm |
|
Inflatable shaft specification |
3” |
|
Tension control range |
0-10kg |
|
Tension control range |
10kg |
|
Printing unit |
|
|
Drive mode |
geared motor drive, synchronous belt drive. |
|
Printing plate shaft |
|
|
Overall composition |
plate roll, scraper, ink tray, anilox roller. |
|
Scraper |
It adopts one-way scraper. The material of the scraper is made of high-strength aluminum alloy profile, which is convenient and quick to load, unload and clean. |
|
Drying device: |
Each group is equipped with a set of infrared drying |
|
Infrared drying |
3KW/4 |
|
Rewinding part |
|
|
Winding method |
One-arm center curl |
|
Single winding diameter |
Φ1200mm |
|
Inflatable shaft specification |
3” |
|
Winding tension range |
1-20KG/full width |
|
Tension control range |
20kg |
|
Complete machine supporting |
|
|
Ceramic mesh roll |
4Article |
|
The print roll |
4Article |
|
PLC |
1 set |
|
Simulation correction |
1 set |
|
Ink box |
4 |
|
Button |
Schneider |
|
Electric |
CHINT |
|
Work-box |
1 set |
|
Supporting facilities (users are responsible for their own) |
|
|
Power supply |
3-phase *380V*50HZ, three-phase west line system |
|
Air compressor |
1KW (1 set) |
